fbpx

Meca EVO1 – LC

489 ex. VAT

Verfügbar bei Nachbestellung | Expected availability 01.09.2022

The new MECA EVO1 pedals is an evolution of the previous generations successful pedals, which are enhanced by experience and feedback from sim racers all around the world. This model is therefore more robust, more reliable and even closer to reality.

Set of 2 pedals without base plate. Brake pedal with loadcell technology.

Verfügbar bei Nachbestellung | Expected availability 01.09.2022

Artikelnummer: Meca-Evo1-2L Kategorie: Schlagwörter: ,

Beschreibung

The new Meca EVO1 pedals increase the emphasis on the robustness, reliability and adjustability

so thus sets the new standard for high-end simracing equipment. The height of the pedals is precisely measured for a perfect ergonomic position for both GT and F1 sitting. Due to their adjustability, the pedals are suitable for all types of simulations from road cars across GT cars to F1 cars.

Made from 4mm thick steel with a surface treatment

Solid construction

We use a high quality bearings. Unibals on the rods are made in according to the Automotive enviroment (stainless steel, aluminum and brass).

Electronics

Meca EVO1 is equipped with new electronics from our own production. The new electronic board has proven RJ11 connectors for easy connection of each pedal.

Excellent quality

Steel parts are made on a CNC Laser. Face plates are treated with ballotin (glass sandblasting).

Variability of attachment

Rig mounting is through pre-drilled holes, according to established standards. The pedals can be positioned in the groove of your choice.

Loadcell technology

All pedals are equipped with a high-quality load cell sensors and the power transmission to the sensor itself has been redesigned..

Fully adjustable

The angle of all pedals can be adjusted and the face plates are height-adjustable. Finding the right settings has never been easier.

New Meca Control Panel

The redesigned Meca Control Panel software now includes 9-point curve settings for each pedal and you can save your own setting profiles. You can also set deadzones and calibrate individual pedals.

With the new accelerator pedal, you will have full control of turn exits.

The pedal has a stiffness adjustment, including a fine adjustment using a pre-loaded spring with a round nut. It is possible to purchase a long faceplate for the heel’n’toe technique. The 20kg load cell sensor with a redesigned power transmission system on the sensor itself ensures precise power transmission. The pedal faceplate is height adjustable and the angle of the pedal can also be adjusted.

The brake pedal now has the option of setting the brake disc gap.

It is said, that the brake pedal is the most important piece of simracing equipment and that’s why we paid the most attention to it again.

We continue to use a proven system of cups that protects the polyurethane segments while simulating a pressurized braking system at full braking. It is now possible to set the brake disc gap using the preload spring. The 200kg load cell sensor continues to take care of the power transmission, thanks to which you can brake with a force of up to 136kg. The brake pedal also has a height-adjustable face plate.

Perfect ergonomics for both GT and F1 cars

With our clutch you will love every shift of your historic racing car

The degressive style of our clutch aims at the most faithful feeling you have in a real car. The pedal is equipped with a total of four springs, thanks to which everyone can adjust the stiffness according to their preference. In addition, the stiffness can be adjusted using the groove in the pedal. Load cell sensor ensures accurate power transmission. The pedal face plate can be height-adjusted and you can also set the angle of the pedal.

More information

Universal and fully adjustable baseplate

The new baseplate with a fully adjustable heel plate also contributes to perfect ergonomics.

The primary part for fastening the pedals is made of extruded aluminum. The entire baseplate forms a very compact and solid base for large load that acts on the individual pedals, especialy the brake pedal – up to 136kg. As a result,, there is no undesirable bend. High variability ensures that everyone finds the perfect position for their races.

More information

Properties

  • 4mm thick steel with surface treatment
  • Pedal lever bearing mounting
  • Adjustable pedal angle
  • Adjustable position forward/backward, left/right
  • Height-adjustable pedal face plate (glass blasted stainless steel)
  • Possible adjust of the stiffness of the pedal in a round groove
  • Fine tunning of the preload spring with a round nut
  • Optional additional purchase of a long face plate for Heel and Toe
  • 20kg load cell sensor
  • Ball bearing rotation axis housing
  • 4mm thick steel with surface treatment
  • Pedal lever bearing mounting
  • Adjustable pedal angle Adjustable position forward/backward, left/right
  • Height-adjustable pedal face plate (Balotin stainless steel)
  • Possible adjust of the stiffness of the pedal in a round groove
  • Fine tunning of the preload spring with a round nut Optional additional purchase of a long faceplate for Heel and Toe
  • 200kg load cell sensor
  • Ball bearing rotation axis housing
  • 4mm thick steel with surface treatment
  • Adjustable pedal angle Adjustable position forward/backward, left/right
  • Height-adjustable pedal face plate (Balotin stainless steel)
  • Degressive style clutch – simulation of clutch compression in a real car
  • Large variation of settings and fine tuning
  • Equipped with 4 tension springs, can be changed according to the user
  • Springs can be removed – 4 springs (max)- 1 spring (min)
  • Load cell sensor
  • Ball bearing rotation axis housing
  • Base part from extruded aluminum
  • Adjustable Heel plate, height wise and distance wise
  • Compact and very solid base for large load forces
  • High modularity and precise settings according to the user’s needs
  • Newly developed electronic board of our own production
  • RJ connectors for connecting individual pedals
  • USB-C connector for connection to a PC
  • New Meca Control Panel software
  • 9-point curve settings for each pedal
  • Deadzones setting and pedal calibration
  • Profile saves
  • Electronics housed in a stainless steel body
  • Accelerator pedal
  • Brake pedal
  • PCB box
  • USB-C cable
  • Set of polyurethanes – 2x black, 2x blue, 2x orange, 1x plastic spacer
  • User guide
  • 8x screw M6x25
  • 8x nut M6
  • 16x steel spacer
  • 8x plastic spacer
  • 2x T-Nut M6
  • 2x Screw M6x12

Zusätzliche Informationen

Gewicht 6 kg

Bewertungen

Es gibt noch keine Bewertungen.

Schreibe die erste Bewertung für „Meca EVO1 – LC“

Deine E-Mail-Adresse wird nicht veröffentlicht.

Title

Go to Top